Focusrite RedNet4

Focusrite RedNet4

Brand: Focusrite
Product Code: RedNet 4
Availability: Pre-Order
Qty:
Price: Rp29,400,000
 

Description

Focusrite RedNet4

Overview

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.

Key Features And Performance:

·         Eight high-quality Focusrite mic preamps 

·         Selectable line and DI inputs for input flexibility 

·         Dynamic range: 119dB 

·         THD+Noise: <0.001% 

·         Mic input Level up to +16dBu 

·         Max mic input gain: 63dB 

·         JetPLL™ jitter-reduction technology

What is RedNet?

RedNet is Focusrite’s new flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite’s RedNet is the first to offer IP network audio interfaces for the recording studio – or any application that requires moving high quality audio around with ultra-low latency.


SPECIFICATIONS

Microphone Inputs

Gain range

0 dB; 8 to 63 dB in 1 dB steps

Type

Electronically balanced, Zin = 2.4 kohms

Max. input level

+16 ±0.5 dB; min. gain for 0 dBFS, Rs = 150 ohms, pad out

Min. input level

-47 ±0.5 dB; max. gain for 0 dBFS, Rs = 150 ohms, pad out

Frequency response

20 Hz – 55 kHz ±0.1 dB (-3 dB @ 80 kHz, fs = 192 kHz); Rs = 150 ohms

THD+N

< 0.0007% @ -1 dBFS; +15 dBu input, Rs = 150 ohms, 20 Hz – 22 kHz

Noise

EIN -128 dB; 60 dB gain, Rs = 150 ohms, 20 Hz – 22 kHz

Phantom power

48 V, independently switchable per-channel

Signal-to-noise ratio

119 dB ‘A’-weighted; Rs = 150 ohms

Line Inputs

Gain range

-12 to 42 dB in 1 dB steps

Max. input level

+24 ±0.5 dB; min. gain for 0 dBFS

Min. input level

-30 ±0.5 dB; max. gain for 0 dBFS

Frequency response

20 Hz – 20 kHz ±0.1 dB

THD+N

﹤ 0.003% @ -1 dBFS; +23 dBu input, min.gain, 20 Hz – 22 kHz

Signal-to-noise ratio

117 dB ‘A’-weighted

Instrument Inputs (Inputs 1 & 2 only)

Gain range

+14 to 68 dB in 1 dB steps

Max. input level

+10 ±0.5 dB; min. gain for 0 dBFS

Min. input level

-44 ±0.5 dB; max. gain for 0 dBFS, pad out

Frequency response

20 Hz – 20 kHz ±0.1 dB

THD+N

﹤ 0.001% @ -1 dBFS; +9 dBu input, min.gain, 20 Hz – 22 kHz

Signal-to-noise ratio

112 dB ‘A’-weighted

Analogue High-Pass Filters

Selection

Independently switchable per-channel

Frequency/slope

-6 dB @ 65 ±3 Hz, 12 dB/octave

Crosstalk

Input to input

﹤-80 dB (all other channels at 0 dBFS)

Digital Performance

Supported sample rates

44.1 / 48 / 88.2 / 96 / 192 kHz

Clock sources

Internal or from network master device

Power

PSU

Internal, Universal type, consumption 30 VA

Front Panel Indicators

Power

Green

Network connected

Green

Sync lock

Green

Sample rate

Yellow x 5

Channel 1/2 source

Yellow x 3 (mic/line/inst)

Signal level

Green x 8 (-42 dBFS); Yellow x 8 (-6 dBFS); Red x 8 (overload)

Channel select buttons

8

Channel function controls

Input source, HPF, phantom power, Gain encoder

Channel display

Colour OLED; channel number, input source, gain

Reviews (0)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: