Focusrite RedNet3

Focusrite RedNet3

Brand: Focusrite
Product Code: RedNet 3
Availability: Pre-Order
Qty:
Price: Rp17,650,000
 

Description

Focusrite RedNet3

Overview

RedNet 3 interfaces your existing digital audio systems and components to the RedNet network, with up to 32 inputs and outputs and full software remote control. The unit includes support for AES/EBU, S/PDIF and ADAT (16 ADAT optical ports support 32 digital channels in and out – even at 96kHz, with S-MUX2) digital audio formats and allows the RedNet system to be synchronised to incoming signal clock or a word clock source.

RedNet 3 can be used simply as a means of converting 32 channels of audio and delivering it somewhere else on the network at near-zero latency. If you need to connect RedNet 3 to your computer there are three methods:

·         The RedNet PCIe card for Core Audio and ASIO applications such as Logic and Nuendo 

·         RedNet 5 for Pro Tools HD, Pro Tools HDX and Pro Tools HD Native via DigiLink connectors 

·         Directly to your computer’s Ethernet port using a standard Ethernet cable (and “Dante Virtual Soundcard”)

What is RedNet?

RedNet is Focusrite’s new flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite’s RedNet is the first to offer IP network audio interfaces for the recording studio – or any application that requires moving high quality audio around with ultra-low latency.


SPECIFICATIONS

Connectivity

• ADAT Optical inputs 1 – 8 via TOSLINK optical connectors: Each connector supports 8 channels at 44.1 or 48k, 4 channels at 96k (S-MUX2), and 2 channels at 192kHz (S-MUX4)*
• ADAT Optical outputs 1 – 8 via TOSLINK optical connectors: Each connector supports 8 channels at 44.1 or 48k, 4 channels at 96k (S-MUX2), and 2 channels at 192kHz (S-MUX4)*
• AES/EBU inputs and outputs 1 – 8 via DB25 connector (replaces port one of the ADAT inputs when in use)
• S/PDIF input 1 – 2 via coaxial port (replaces one AES bank when in use) 
• S/PDIF output 1 – 2 via coaxial port 
• Word Clock input via BNC port 
• Word Clock output via BNC port 
• Dante Ethernet port

* When running at 44.1 or 48kHz, ADAT input ports 5 – 8 are disabled and ADAT output ports 5-8 mirror output ports 1-4

Inputs

AES/EBU inputs

8 channels, with switchable SRC

AES/EBU connector

25-way female Dsub, wired to AES 59 (combined I/O)

ADAT inputs

32 channels @ 44.1 / 48 / 88.2 / 96 kHz sample rate; 16 channels @ 192 kHz

ADAT connectors

TOSLINK lightguides x 8

S/PDIF input

2 channels, with switchable SRC 44.1 to 192 kHz

S/PDIF connector

Phono (RCA) socket

AES/EBU Input Sampe Rate Converters

Input sample rate range

32 to 216 kHz

Gain error

-0.3 dB

Dynamic Range

> 138 dB (-60 dBFS method)

THD+N

< -130 dB (0.00003%); 0 dBFS input

Outputs

AES/EBU outputs

8 channels, sync-locked to RedNet system sample rate

AES/EBU connector

See “Inputs”

ADAT outputs

32 channels @ 44.1 / 48 / 88.2 / 96 kHz sample rate; 16 channels @ 192 kHz

ADAT connectors

TOSLINK lightguides x 8

S/PDIF output

2 channels, sync-locked to RedNet system sample rate

S/PDIF connector

Phono (RCA) socket

Operating Modes

AES/EBU mode

AES/EBU inputs – Chs. 1 to 8; ADAT inputs – Chs. 9 to 32*; AES/EBU outputs – Chs. 1 to 8; ADAT outputs – Chs. 1 to 32*

ADAT mode

ADAT inputs – Chs. 1 to 32*; AES/EBU outputs – Chs. 1 to 8; ADAT outputs – Chs. 1 to 32*

Digital Performance

Supported sample rates

44.1 / 48 / 88.2 / 96 / 192 kHz

Clock sources

Local or from network master device

Local clock sources

Internal, Word Clock input, AES input 1, ADAT input 1, S/PDIF input

External word clock range

Sample rate ±7.5%

Power

PSU

Internal, 100 - 240 V, consumption 30 VA

 

Reviews (0)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: