Focusrite RedNet2

Focusrite RedNet2

Brand: Focusrite
Product Code: RedNet 2
Availability: Pre-Order
Qty:
Price: Rp35,280,000
 

Description

Focusrite RedNet2

OVERVIEW

RedNet 2 adds 16 remote-controlled analogue channels in and out to your RedNet network and can be located anywhere you can run an Ethernet cable. Featuring Focusrite’s precision 24-bit A-D and D-A conversion for superb audio performance, it delivers 119dB dynamic range at sample rates up to 192kHz. The rear panel includes standard DB25 connectors for analogue patchbay or breakout cable interfacing.

RedNet 2 can be used simply as a means of converting 16 channels of audio and delivering it some somewhere else on the network at near-zero latency. If you need to connect RedNet 2 to your computer there are three methods:

·         The RedNet PCIe card for Core Audio and ASIO applications such as Logic and Nuendo 

·         RedNet 5 for Pro Tools HD, Pro Tools HDX and Pro Tools HD Native via DigiLink connectors

·         Directly to your computer’s Ethernet port using a standard Ethernet cable (and “Dante Virtual Soundcard”)

What is RedNet?

RedNet is Focusrite’s new flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite’s RedNet is the first to offer IP network audio interfaces for the recording studio – or any application that requires moving high quality audio around with ultra-low latency.


SPECIFICATIONS

Inputs

 

Analogue line inputs

16

 

Connector

25-way female Dsub x 2, wired to AES 59

 

0 dBFS reference levels

+18 or +24 dBu (switchable)

 

Frequency response

20 Hz – 20 kHz ±0.05 dB

 

THD+N

< 0.001% unweighted; -1 dBFS input, 20 Hz – 22 kHz

 

Dynamic range

119 dB ‘A’-weighted (-60 dBFS method)

 

Converter dynamic range

120 dB

 

Signal-to-noise ratio

119 dB ‘A’-weighted; 20 Hz – 20 kHz

 

Outputs

 

Analogue line outputs

16

 

Connector

25-way female Dsub x 2, wired to AES 59

 

0 dBFS reference levels

+18 or +24 dBu (switchable)

 

Frequency response

20 Hz – 20 kHz ±0.15 dB

 

THD+N

< 0.001% unweighted; -1 dBFS input, 20 Hz – 22 kHz

 

Dynamic Range

119 dB ‘A’-weighted (-60 dBFS method)

 

Converter dynamic range

120 dB

 

Signal-to-noise ratio

119 dB ‘A’-weighted; 20 Hz – 20 kHz

 

Crosstalk

 

Input or Output to Input

< -90 dB (all other channels at 0 dBFS)

 

Input or Output to Output

< -100 dB (all other channels at 0 dBFS)

 

Digital Performance

 

Supported sample rates

44.1 / 48 / 88.2 / 96 / 192 kHz

 

Clock sources

Internal or from network master device

 

Power

 

PSU

Internal, Universal type, consumption 30 VA

 

Front Panel Indicators

 

Power

Green

 

Network connected

Green

 

Sync lock

Green

 

Sample rate

Yellow x 5

 

Input/Output range

Yellow x 2

 

Input/Output signal level

Bi-colour x 32 (Green = -42 dBFS; Orange = -6 dBFS; Red = overload)

 

Reviews (0)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: