Focusrite RedNet1

Focusrite RedNet1

Brand: Focusrite
Product Code: RedNet 1
Availability: Pre-Order
Qty:
Price: Rp23,500,000
 

Description

Focusrite RedNet1

OVERVIEW

RedNet 1 connects to your network with a single Ethernet cable. It’s remotely controlled via the network and can be placed anywhere in your facility. It offers eight channels of line-level analogue in and out, with Focusrite’s precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz. The rear panel includes standard DB25 connectors for analogue patchbay or breakout cable interfacing.

RedNet 1 can be used simply as a means of converting 8 channels of audio and delivering it somewhere else on the network at near-zero latency. If you need to connect RedNet 1 to your computer there are three methods:

·         The RedNet PCIe card for Core Audio and ASIO applications such as Logic and Nuendo 

·         RedNet 5 for Pro Tools HD, Pro Tools HDX and Pro Tools HD Native via DigiLink connectors

·         Directly to your computer’s Ethernet port using a standard Ethernet cable (with “Dante Virtual Soundcard”)

What is RedNet

RedNet is Focusrite’s new flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite’s RedNet is the first to offer IP network audio interfaces for the recording studio – or any application that requires moving high quality audio around with ultra-low latency.


SPECIFICATION

Inputs

Analogue line inputs

8

Connector

25-way female Dsub, wired to AES 59

0 dBFS reference levels

+18 or +24 dBu (switchable)

Frequency response

20 Hz – 20 kHz ±0.05 dB

THD+N

< 0.001% unweighted; -1 dBFS input, 20 Hz – 22 kHz

Dynamic range

119 dB ‘A’-weighted (-60 dBFS method)

Converter dynamic range

120 dB

Signal-to-noise ratio

119 dB ‘A’-weighted; 20 Hz – 20 kHz

Outputs

Analogue line outputs

8

Connector

25-way female Dsub, wired to AES 59

0 dBFS reference levels

+18 or +24 dBu (switchable)

Frequency response

20 Hz – 20 kHz ±0.15 dB

THD+N

< 0.001% unweighted; -1 dBFS input, 20 Hz – 22 kHz

Dynamic Range

119 dB ‘A’-weighted (-60 dBFS method)

Converter dynamic range

120 dB

Signal-to-noise ratio

119 dB ‘A’-weighted; 20 Hz – 20 kHz

Crosstalk

Input or Output to Input

<-90 dB (all other channels at 0 dBFS)

Input or Output to Output

<-100 dB (all other channels at 0 dBFS)

Digital Performance

Supported sample rates

44.1 / 48 / 88.2 / 96 / 192 kHz

Clock sources

Internal or from network master device

Power

PSU

Internal, Universal type, consumption 30 VA

Front Panel Indicators

Power

Green

Network connected

Green

Sync lock

Green

Sample rate

Yellow x 5

Input/Output range

Yellow x 2

Input/Output signal level

Bi-colour x 16 (Green = -42 dBFS; Orange = -6 dBFS; Red = overload)

Reviews (0)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: