Aphex 207D

Aphex 207D

Brand: Aphex
Product Code: 207D
Availability: Pre-Order
Qty:
Price: Rp12,230,000
 

Description

OVERVIEW

Two Channel Reflected Plate Amplifier Tube Preamp for Mics and Instruments

The Model 207D is an RPA tube mic and instrument preamp offers extremely low noise and high gain that meets or exceeds the performance of preamps costing many times more. The Model 207D will reveal the subtlety and power of both vintage and modern microphones. With its S/PDIF digital output and Word Clock connection, the Model 207D offers direct digital connection to your signal chain, with up to 96kHz sampling rates.

The MicLim„ microphone limiter, from our flagship Model 1788A Eight Channel Premium Remote Controlled Mic Preamp, makes the Model 207D virtually impervious to input clipping – the perfect front end for digital recorders and DAWs to record hotter tracks at the highest possible resolution.

The Model 207D captures a sound that is warm, full and true to life. Whether you are recording, mixing front of house or broadcasting, give your microphones a great start with the Aphex Model 207D Tube Mic/Instrument Preamp.


SPECS

AUDIO

Frequency Response

+0, -0.5dB 30Hz – 30 kHz

EIN

-129dBu (input shorted)

Crosstalk(10 Hz – 22kHz)

-79 dB or better

(10 Hz-22kHz at -11dBfs)

< 0.18%

Tube Type

12AT7 / ECC81 Dual Triode

MIC INPUT

 

IF OPERATING LEVEL SET TO +4 dBu

IF SET TO -10dBv (-7.8dBu)

Connector

XLR-3F

same

Type

Transformerless, NPN active balanced

same

Balanced

2k ohms nominal

same

Maximum Level

0 dBu

+12.5 dBV (+14.8 dBu)

CMRR

Greater than 70dB @ 60 Hz

same

Nominal Preamp Gain

20 to 65dB minus OUTPUT TRIM loss

8 to 53 dB minus OUTPUT TRIM loss

INSTRUMENT INPUT

Connector

1/4″ Phone Jacks

same

Type

Unalanced JFET amp

same

Input Z

1M ohm nominal

same

Maximum Level

10V RMS

same

Nominal Preamp Gain

infinity to 65dB minus OUTPUT TRIM loss

infinity to 38dB minus OUTPUT TRIM loss

OUTPUT

 

Connector

XLR-3M and 1/4″ TRS Phone Jacks

 

Type

Impedance balanced(may be used unbalanced)

 

Output Z Balanced

XLR: 66 ohms – TRS: 1200 ohms

 

Output Z Unbalanced

XLR: 33 ohms – TRS: 600 ohms

 

Nominal Level

+4 dBu

-10dBv (316 mVRMS)

Maximum Level

+21dBu Unloaded

+6.75 dBV Unloaded

Output Trim

0 to -12 dB

same

INSERT

Connector

1/4″ TRS Phone Jack

Send

Tip

Return

Ring

Nominal Operating Level

-10dBv (316 mVRMS)

Point of Insertion

Between front-end and Tube Output Stage

OTHER SPECIFICATIONS

Power requirements

90-250 VAC 50-60 Hz 12W

Dimensions

19″W x 1.75″H x 8.25″ D Â Â 1 Rack U(482.6mm x 44.5mm x 209.6mm)

Depth behind front panel

7.5″(190.5 mm)

Net Weight

6 lbs(2.73 kg)

Shipping Weight

9 lbs(4.1 kg)

Reviews (0)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: